Martin Rush MH 7 Hybrid:
- 250 W Philips Platinum 11R Lamp
- 2.2 – 24° zoom in Beam Mode
- 2.5 – 24° zoom in Spot Mode
- 15 – 45° zoom in Wash Mode
- 8 rotating/indexing gobos
- 12 static gobos
- 10 colors plus CTO, CTB, UV
- 4-facet linear prism
- 8-facet circular prism
- Motorized focus
- 3- and 5-pin XLR DMX connection
- PowerCon IN and THRU
Martin Rush MH 7 Hybrid Teknik Özellikler:
PhysicalLength: 301 mm (11.9 in.)Width: 408 mm (16.1 in.)Height: 644 mm (25.4 in.)Weight: 24 kg (52.9 lbs.)
Dynamic EffectsColor wheel: 13 colors incl. CTO, CTB, UV and openRotating gobo wheel: 8 gobos plus open, 16-bit indexing, rotation and shakeStatic gobo wheel: 12 gobos plus open, wheel rotation and shakePrism 1: 4-facet linear, 16-bit indexing, variable rotation direction and speedPrism 2: 8-facet radial, 16-bit indexing, variable rotation direction and speedFocus: Motorized, 16-bit coarse and fine controlZoom: Motorized, 16-bit coarse and fine controlDimming: 0-100%, coarse and fine controlShutter: Strobe effect, pulse effects, instant open and blackoutPan: 540°Tilt: 250°
Control and ProgrammingControl system: DMXDMX channels: 21Setting and addressing: Control panel with backlit LCD displayDMX compliance: USITT DMX512/1990
LampApproved lamp: Philips MSD Platinum 11R 250 WColor temperature: 7800 KAverage lifetime: 2000 hours**Under manufacturer's test conditions
OpticsCutoff angle, Beam Mode: 2.2° - 24°Cutoff angle, Spot Mode: 2.5° - 24°One-tenth peak angle, Wash Mode: 15° - 45°
ConstructionColor: BlackHousing: High-impact flame-retardant thermoplasticProtection rating: IP20
GobosInterchangeable rotating gobosPermitted material: Stainless steel or borosilicate glass with 450° C high temp. coatingDiameter: 14 mm +0/-0.2 mm (0.55 in. +0/-0.008 in.)Max. image diameter, glass: 8 mm (0.31 in.)Max. image diameter, metal: 9.5 mm (0.37 in.)Thickness, glass: 1.1 mm +0/-0.05 mm (0.045 in. +0/-0.002 in.)Thickness, metal: 0.2 mm (0.008 in) nominal
InstallationMounting points: Two quarter-turn brackets for rigging clampsLocation: Indoor use only, must be fastened to surface or structureOrientation: AnyMinimum distance to illuminated surfaces: 10 m (33 ft.)Minimum distance to combustible materials: 20 cm (8 in.)Minimum clearance around fans and vents: 50 cm (20 in.)
ConnectionsAC power in/thru: Neutrik PowerConDMX data in/out: 3-pin and 5-pin locking XLR
ElectricalAC power (EU models): 100-240 V nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch modePrimary fuse: 5T, 250 V, 8.0 A
Typical Power and Current120 V, 60 Hz: 377 W, 3.1 A, PF 0.985230 V, 50 Hz: 372 W, 1.7 A, PF 0.978Measurements made at nominal voltage. Figures are typical, not maximum, allow for a deviation of +/- 10%.
ThermalCooling: Forced air (temperature-regulated, low noise)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 0° C (32° F)Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 1430 BTU/hr.
ApprovalsEU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493EU EMC: EN 55015; EN 55032; EN 55103-1, -2; EN 61000-3-2,-3; EN 61000-4-2, -4, -5; EN 61547US safety: UL 1573US EMC: CFR Title 47 Part 15 Class ACanadian safety: CSA C22.2 No. 166Canadian EMC: ICES-003 Class AAustralia/NZ (pending): RCM
Included ItemsPhilips MSD Platinum 11R 250 W lamp (installed)Power cable, 1.5 m (4.9 ft.), without mains plugOmega bracket for rigging clamp attachment
AccessoriesPhilips MSD Platinum 11R 250 W lamp: P/N 50481205Flightcase for 2 x RUSH MH 7 Hybrid: P/N 91515039Cables, 16 A, for connection to power in chainsPower input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9 ft. 11 in.): P/N 11541508Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 1.4 m (4 ft. 8 in.): P/N 11541509Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 2.25 m (7 ft. 5 in.): P/N 11541510Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3.25 m (10 ft. 8 in.): P/N 11541511ConnectorsNeutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805DMX linkDMX termination plug, 3-pin male XLR: P/N 91613017Installation hardwareG-clamp: P/N 91602003Half-coupler clamp: P/N 91602005